Item #: FG-7010

Static Solutions, Inc. heel grounders are specially designed to provide a continuous ground path between the user and a properly grounded ESD floor wax, ESD paint, or ESD rubber/PVC tiles. Our heel grounders are designed to drain the static charge of a user that is built up during normal activity. They offer instant static dissipation for rapid protection.

Job functions which require worker mobility should use heel grounders. Failure to wear a heel grounder risks potential damage to the equipment which the user operates and the component parts they contact.

All Ohm-Stat foot grounders can be adjusted to fit the user. The Ohm-Stat Heel Grounder line has four unique styles to fit a wide variety of men's and women's shoes, boots, safety shoes, loafers, tennis shoes, and running shoes. They are easy cleaned with mild detergent and water.

To assure that a continuous path to ground is maintained, the user should wear the ESD footwear on both feet. A heel grounder should be used on a floor surface with a resistivity of less than 10¹⁰ Ohms/sq.

Features:

• Heel Cup: .060" (1.5mm) thick 1-3/8" wide dual elastomer with non-smudging interior and black (non smudging where noted) exterior
• Heel Cup Resistivity: 10³-10⁵ Ohms/sq.
• Resistor: One megohm value ¼ watt (+/-10%) carbon film resistor
• Tab: Blue (or customized) 3/8" wide fray resistant polyester tab with conductive carbon stuffed fibers
• Tab to Cup Resistance: 1x10⁶ ohms - 1x10⁷
• Elastic D ring, two layer non blacking interior with 1 megohm resistor
• Will Not Mark Shoes
• Comfortable Closure
• High tire grade rubber: ensures complete static dissipation
• Conforms to EOS/ESD 20.20 Standards
• Wide 1.5 inch cup
• Long lasting shore d durometer comfortable to wearer
• Patented design #6,426,859 B1